Electrically Conductive

RBC Industries offers a line of 2-part electrically conductive epoxy resins to meet the most challenging applications. This line offers products that will bond to a variety of substrates including metal, glass, ceramics and plastics. This makes RBC electrically conductive epoxies a great alternative when conventional soldering techniques just won’t do. 

Of course, as with all of our other electronics industry products, this line offers epoxies that can be cured at room temperature or at elevated temperatures or we can always work with you on a custom formulation to meet your specific application requirements. Over the past thirty-seven years RBC has formulated some of the world’s finest, most reliable and most advanced epoxy systems. With your technology on the line it would be unthinkable to use a material that you cannot trust. RBC is the name that the electronics, electrical, automotive and aerospace industries trust on their components when electrical conductivity is a necessity.

Electrically Conductive Materials

NameDescriptionPot LifeMixed Viscosity (cps)
Volume Resistivity ohm-cm,°C
Operating Temperature Range (°C)UL Listed

Two-component, hardener choice yields variable cure ratio & characteristics, silver-filled conductive epoxy.

2-6 hoursThixotropic Paste1x10^⁻⁴-55 to 170No

Two-component, variable ratio, economical, nickel-filled conductive epoxy.

1-24 hoursThixotropic Paste1x10⁻²-65 to 170No

The products listed in this chart constitute just some of the products in our standard line, additional products may be found in our Resources Section. In addition, samples are readily available upon request. If you cannot find what you are looking for, our technical staff can also work with you to create a custom formulation to meet your specific requirements. If you have any additional questions or require any samples, please fill out our Online Information Request Form and someone from our staff will get back to you right away.

Note: The properties listed were determined using the recommended hardener. Other hardeners can be used with these products to obtain other properties. Consult individual data sheets and/or hardener chart for information. All tests were performed at 25 degrees C unless otherwise stated.)