RBC #2365 is a thixotropic version of RBC#2360. RBC#2365 is a non-sag adhesive. It exhibits high peel strength, excellent shock and vibration resistance. Cured properties can be varied with the amount of hardener used, allowing a wide range of resiliency. It is ideal for bonding materials with different coefficients of thermal expansion. RBC#2365 bonds well to nickel, aluminum, nylon, polypropylene, glass and wood.
Mixed Viscosity @ 25oC,cps: Thixotropic
Pot Life: 1-2 hours
Shelf Life, (closed Container @ 25oC): 12 Months
Specifc Gravity @ 25oC: 1.07
Hardness, Shore D: 40
Linear Shrinkage, in./in.: 0.005
Moisture Absorption 10 Days @ 25oC, %: 0.55
Izod Impact Strength, ft. lbs./in. of notch: 11.25
Bond Shear Strength, psi Al/Al @ 25oC: 4,500
Tensile Strength @ 25oC, psi: 3,500
Compressive Strength @ 25oC, psi: 8,000
Thermal Conductivity, cal/sec/cm2/oC/cm X 10-4: 5.20
Thermal Stability, 1000 Hrs. @ 175oC, % Wt. Loss: 1.25
Coefficient of Thermal Expansion, in./in./oC X 10-6: 45.0
Operating Temperature Range, oC: -55 to 100
Volume Resistivity @ 25oC, ohm-cm: 8 x 1012
Dielectric Strength, volts/mil: 430
Dielectric Constant @ 25oC, 100 KC: 3.3
Dissipation Factor @ 25oC, 100 KC: 0.018
The above properties are typical of a semi-flexible formulation cured for 1 hr @ 65oC and 1 hr. @ 120oC.
Weigh the desired amount of #2365 Resin into a clean container and combine with AB-528 Hardener in one of the ratios shown below. Mix thoroughly for a minimum of three minutes by hand, or one minute by machine.
Semi-Flexible, Impact and Shock Resistant: 100 parts RBC #2365, 100 parts Hardener AB-528
Flexible, Excellent Peel Strength: 100 parts RBC #2365, 132 parts Hardener AB-528
Pot life ranges from 1 - 2 hours depending on batch size and hardener ratio. Cure for 72 hours at room temperature (25oC) or 2 hours at 65oC. For optimum properties, cure 1 hour at 65oC followed by 1 hour at 120oC.