Decorative

Decorative

Adhesives

Recommended Surfaces to be Bonded Product Number Description A to B Mixing Ratio Working Time Cure Schedule
A, B, C Adhesive #11A
Adhesive #11B
  • 5-minute adhesive
  • Rigid bonding system
  • Easy to use
  • Room temperature cure
  • Also available in easy-to-use 28ml dual cartridges
1 to 1 by weight or volume 3 minutes 5 minutes @ RT*
A, B, E, G, H
Excellent for foil-backed stones
Adhesive #7314A
Adhesive #7314B
  • General purpose system
  • Slight amber tint
  • Best all around adhesive
  • Room temperature cure
1 to 1 by weight or volume 1-2 hours 12 hours overnight @RT* or 1-2 hours @ 65oC
A, B, E, G, H
Excellent for foil-backed stones
Adhesive #7315A
Adhesive #7315B
  • General purpose system
  • Thicker version of #7314 for gap filling
  • Room temperature cure
1 to 1 by weight or volume 1-2 hours 12 hours overnight @RT* or 1-2 hours @ 65oC
C, D, E, F, G Adhesive #115A
Adhesive #115B
  • Translucent
  • Excellent for filling gaps between irregular surfaces
  • Room temperature cure
2 to 1 by weight or volume 60-90 minutes 12 hours overnight @RT* or 1-2 hours @ 65oC
C, D, E, F, G Adhesive #118A
Adhesive #118B
  • Translucent
  • Very good impact resistance
  • Heat cure
2 to 1 by weight or volume 90 minutes 12 hours overnight @ 30-35oC or 2-3 hours @ 65oC
C, D, E, F, H Adhesive #119A
Adhesive #119B
  • Translucent
  • Very good impact resistance
  • Thicker version of #118 A/B used for filling gaps between irregular surfaces
  • Heat cure
2 to 1 by weight or volume 90 minutes 12 hours overnight @ 30-35oC or 2-3 hours @ 65oC
C, D, E, F, H Adhesive #122A
Adhesive #122B
  • Translucent
  • Excellent impact resistance
  • Flexible bonding
  • Heat cure
  • Available with other hardeners
2 to 1 by weight or volume 3-6 hours 2-3 hours @ 65oC
  Adhesive #123A
Adhesie #123B
  • Translucent
  • Excellent impact resistance
  • Flexible bonding
  • Thicker version of #122A/B used for filling gaps between irregular surfaces
  • Heat cure
  • Available with other hardeners
2 to 1 by weight or volume 3-6 hours 2-3 hours @ 65oC

For further information about these or any other products, please contact RBC. 

Adhesive Selector Chart

Instructions: Select the surface to be bonded and read what letter corresponds to that selection.  Follow the chart below to choose the product that meets your working conditions.                                 
Surfaces to be Bonded

A. Metal to Metal
B. Metal to Plastic
C. Unfoiled Stones to Metal
D. Glass Stones to Metal 
E. Foil-Backed Stones to Plastic or Metal
F. Pearls to Plastic or Metal
G. Plastic to Plastic
H. Fabric to Plastic, Metal, Leather

Sizes Available

2 oz. kits to 15 gallon kits
See Price List for details

50cc Dual Cartridges Available

Only in Adhesive 1:1 systems

*RT= Room Temperature (72oF or 23oC)
Working time is based on 100-gram batches. Smaller batches will give longer working times.

Statements and descriptions are informational only. The purchaser shall be solely responsible for determining the adequacy of the product for any and all uses.