RBC-3410 is a filled, low-viscosity, general purpose epoxy potting and casting resin. Its physical and electrical properties are similar to RBC-3300 Resin, but RBC-3410 offers superior wetting characteristics when potting intricate components. It can be cured at room temperature or elevated temperatures depending upon the hardener selected and the heat resistance of the part. | HANDLING PROPERTIES: | Mixed Viscosity @ 25oC, cps
Shelf Life, (closed Container @ 25oC) | 1,500 12 months | | PHYSICAL PROPERTIES (CURED): | Color
Specific Gravity @ 25oC
Hardness, Shore D
Linear Shrinkage, in./in.
Moisture Absorption 10 Days @ 25oC, %
Izod Impact Strength, ft. lbs./in. of notch
Tensile Strength @ 25oC, psi
Compressive Strength @ 25oC, psi | Black
1.55
85
0.003
0.30
0.29
6,500
14,400
| | THERMAL PROPERTIES (CURED): | Thermal Conductivity, cal/sec/cm2/oC/cm X 10-4
Thermal Stability, 1000 Hrs. @ 175oC, % Wt. Loss
Coefficient of Thermal Expansion, in./in./oC X 10-6
Heat Distortion Temperature, oC
Operating Temperature Range, oC
| 8.0
0.50
39
130
-55 to 155
| | ELECTRICAL PROPERTIES (CURED): | Volume Resistivity @ 25oC, ohm-cm
Dielectric Strength, volts/mil
Dielectric Constant @ 25oC, 100 KC
Dissipation Factor @ 25oC, 100 KC
| 8x1016
475
4.1
0.022
|
(Note: The above properties are typical of a system cured with hardener #AB-312.)
RECOMMENDED HARDENERS:
A-110: A rigid, room temperature curing system with limited pot life and fast cure.
A-120: A resilient, low viscosity system with slightly longer pot life, that exhibits excellent resistance to thermal shock.
AB-312: Good resistance to heat, chemicals, thermal and mechanical shock, and good electrical properties at high humidity.
MIXING INSTRUCTIONS:
Weigh the desired amount of #3400 Resin into a clean container and combine with recommended hardener in one of the ratios shown below. | | | | | Hardener | Parts by wt. | Pot Life | | | per 100 pts. resin | 100 grms. @ 25oC | | A-110 | 7 | 1 hr. | | A-120 | 15 | 2 hrs. | | AB-312 | 16 | 4 hrs. |
| | | | | | RECOMMENDED CURE SCHEDULE: | | Hardener | Cure @ 25oC | Cure @ 65oC | Cure @ 100oC | Cure @ 130oC | | A-110 | 24 HRS. | 2 HRS. | - | - | | A-120 | 24 HRS. | 2 HRS. | - | - | | AB-312 | - | 6 HRS. | 3 HRS. | 2 HRS. |
|
