RBC-3400 Technical Data Sheet

Type:

Electronics

RBC-3400 is a filled, low viscosity, general purpose epoxy potting resin (epoxy potting compound) and epoxy casting resin. Its physical and electrical properties are similar to RBC-3300 Resin, but RBC-3400 offers superior wetting characteristics when potting and encapsulating intricate components. It can be cured at room temperature or elevated temperatures, depending upon the epoxy hardener selected and the heat resistance of the part.

HANDLING PROPERTIES:
Mixed Viscosity @ 25^oC, cps Shelf Life, (closed Container @ 25^oC)	2,900 12 months
PHYSICAL PROPERTIES (CURED):
Color Specific Gravity @ 25^oC Hardness, Shore D Linear Shrinkage, in./in. Moisture Absorption 10 Days @ 25^oC, % Izod Impact Strength, ft. lbs./in. of notch Tensile Strength @ 25^oC, psi Compressive Strength @ 25^oC, psi	Black 1.45 85 0.003 0.29 0.29 6,060 17,300
THERMAL PROPERTIES (CURED):
Thermal Conductivity, cal/sec/cm2/^oC/cm X 10^-4 Thermal Stability, 1000 Hrs. @ 175^oC, % Wt. Loss Coefficient of Thermal Expansion, in./in./^oC X 10^-6 Heat Distortion Temperature, ^oC Operating Temperature Range, ^oC	7.8 0.50 39 130 -55 to 155
ELECTRICAL PROPERTIES (CURED):
Volume Resistivity @ 25^oC, ohm-cm Dielectric Strength, volts/mil Dielectric Constant @ 25^oC, 100 KC Dissipation Factor @ 25^oC, 100 KC	8x10¹⁶ 475 4.1 0.022

(Note: The above properties are typical of a system cured with hardener #AB-312.)

RECOMMENDED HARDENERS:
AB-56: A fast, room temperature curing system with good chemical and thermal properties.
A-110: A rigid, room temperature curing system with limited pot life and fast cure.
A-120: A resilient, low viscosity system with slightly longer pot life, that exhibits excellent resistance to thermal shock.
AB-312: Good resistance to heat, chemicals, thermal and mechanical shock, and good electrical properties at high humidity.

MIXING INSTRUCTIONS:
Weigh the desired amount of #3400 Resin into a clean container and combine with recommended hardener in one of the ratios shown below.


Hardener	Parts by wt.	Pot Life
	per 100 pts. resin	100 grms. @ 25^oC
AB-56	25	25 min.
A-110	7	1 hr.
A-120	15	2 hrs.
AB-312	16	2 hrs.


RECOMMENDED CURE SCHEDULE:
Hardener	Cure @ 25^oC	Cure @ 65^oC	Cure @ 100^oC	Cure @ 130^oC
AB-56	24 HRS.	1 HR.	-	-
A-110	24 HRS.	2 HRS.	-	-
A-120	24 HRS.	2 HRS.	-	-
AB-312	-	6 HRS.	3 HRS.	2 HRS.

ASSOCIATED PUBLICATIONS:
RBC-3400 Epoxy Resin Material Safety Data Sheet (MSDS)

AB-56 Epoxy Hardener Material Safety Data Sheet (MSDS)

A-110 Epoxy Hardener Material Safety Data Sheet (MSDS)

A-120 Epoxy Hardener Material Safety Data Sheet (MSDS)

AB-312 Epoxy Hardener Material Safety Data Sheet (MSDS)


Powered by Getfused CMS