RBC-3300 is a filled, medium-viscosity, general-purpose epoxy potting compound and epoxy casting resin which offers low shrinkage, good air release, and excellent physical and electrical properties. It can be cured at room temperature or at elevated temperatures depending upon the epoxy hardener selected and the heat resistance of the part. | HANDLING PROPERTIES: | Mixed Viscosity @ 25oC, cps
Shelf Life, (closed Container @ 25oC) | 3,600
12 months | | PHYSICAL PROPERTIES (CURED): | Color
Specific Gravity @ 25oC
Hardness, Shore D
Linear Shrinkage, in./in.
Moisture Absorption 10 Days @ 25oC, %
Izod Impact Strength, ft. lbs./in. of notch
Tensile Strength @ 25oC, psi
Compressive Strength @ 25oC, psi | Black
1.50
90
0.19
0.29
0.28
5,800
25,200
| | THERMAL PROPERTIES (CURED): | Thermal Conductivity, cal/sec/cm2/oC/cm X 10-4
Thermal Stability, 1000 Hrs. @ 175oC, % Wt. Loss
Coefficient of Thermal Expansion, in./in./oC X 10-6
Heat Distortion Temperature, oC
Operating Temperature Range, oC
| 7.8
0.50
36
145
-55 to 155
| | ELECTRICAL PROPERTIES (CURED): | Volume Resistivity @ 25oC, ohm-cm
Dielectric Strength, volts/mil
Dielectric Constant @ 25oC, 100 KC
Dissipation Factor @ 25oC, 100 KC
| 8x1016
475
4.0
0.022
|
(Note: The above properties are typical of a system cured with hardener #AB-312.) MIXING INSTRUCTIONS:
Weigh the desired amount of #3300 Resin into a clean container and combine with recommended hardener in one of the ratios shown below. RECOMMENDED HARDENERS:
A-110: A rigid, room temperature curing system with limited pot life and fast cure.
A-120: A resilient, low viscosity system with slightly longer pot life, that exhibits excellent resistance to thermal shock.
AB-312: Good resistance to heat, chemicals, thermal and mechanical shock, and good electrical properties at high humidity. | Hardener | Parts by wt. | Pot Life | | | per 100 pts. resin | 100 grms. @ 25oC | | A-110 | 7 | 1 hr. | | A-120 | 15 | 2 hrs. | | AB-312 | 16 | 4 hrs. |
| | | | | | RECOMMENDED CURE SCHEDULE: | | Hardener | Cure @ 25oC | Cure @ 65oC | Cure @ 100oC | Cure @ 130oC | | A-110 | 24 HRS. | 2 HRS. | - | - | | A-120 | 24 HRS. | 2 HRS. | - | - | | AB-312 | - | 6 HRS. | 3 HRS. | 2 HRS. |
ASSOCIATED PUBLICATIONS:
RBC-3300 Epoxy Resin Material Safety Data Sheet (MSDS) A-110 Epoxy Hardener Material Safety Data Sheet (MSDS) A-120 Epoxy Hardener Material Safety Data Sheet (MSDS) AB-312 Epoxy Hardener Material Safety Data Sheet (MSDS)
|
