Decorative Electronics Industrial Hallemite Flooring and Construction

RBC-3100 Technical Data Sheet

Type:  Electronics  
Print this page  |  
 

RBC-3100 is an unmodified, medium-viscosity epoxy resin used as an epoxy potting compound and in epoxy casting applications where a clear epoxy resin system is desirable. Depending on the epoxy hardener selected, RBC-3100 epoxy resin can be cured at room temperature or at elevated temperatures to obtain the specific desired properties.

 

 

HANDLING PROPERTIES:
Mixed Viscosity @ 25oC, cps
Shelf Life, (closed Container @ 25oC)
1,500
12 months
PHYSICAL PROPERTIES (CURED):
Color
Specific Gravity @ 25oC
Hardness, Shore D
Linear Shrinkage, in./in.
Moisture Absorption 10 Days @ 25oC, %
Izod Impact Strength, ft. lbs./in. of notch
Tensile Strength @ 25oC, psi
Compressive Strength @ 25oC, psi
Clear
1.15
92
0.008
0.19
0.55
10,100
21,000
THERMAL PROPERTIES (CURED):
Thermal Conductivity, cal/sec/cm2/oC/cm X 10-4
Thermal Stability, 1000 Hrs. @ 175oC, % Wt. Loss
Coefficient of Thermal Expansion, in./in./oC X 10-6
Heat Distortion Temperature, oC
Operating Temperature Range, oC
5.2
0.45
50
140
-55 to 140
ELECTRICAL PROPERTIES (CURED):
Volume Resistivity @ 25oC, ohm-cm
Dielectric Strength, volts/mil
Dielectric Constant @ 25oC, 100 KC
Dissipation Factor @ 25oC, 100 KC
6x1015
475
4.3
0.030


(Note: The above properties are typical of a system cured with hardener #AB-312.)


RECOMMENDED HARDENERS:

A-110: A rigid, room temperature curing system with limited pot life and fast cure.
A-120, A-121: A resilient, low viscosity system with slightly longer pot life, that exhibits excellent resistance to thermal shock.
AB-312: Good resistance to heat, chemicals, thermal and mechanical shock, and good electrical properties at high humidity.

MIXING INSTRUCTIONS:
Weigh the desired amount of #3100 Resin into a clean container and combine with recommended hardener in one of the ratios shown below.

 

     
Hardener
Parts by wt.
Pot Life
 
per 100 pts. resin
100 grms. @ 25oC
A-110
14
35-40 mins.
A-120, A-121
30
40-50 mins.
AB-312
32
3 hrs.
       
RECOMMENDED CURE SCHEDULE:
Hardener
Cure @ 25oC
Cure @ 65oC
Cure @ 100oC
Cure @ 130oC
A-110
24 HRS.
2 HRS.
-
-
A-120, A-121
24 HRS.
2 HRS.
-
-
AB-312
-
6 HRS.
3 HRS.
2 HRS.


ASSOCIATED PUBLICATIONS:
RBC-3100 Epoxy Resin Material Safety Data Sheet (MSDS)

 

A-110 Epoxy Hardener Material Safety Data Sheet (MSDS)

A-120 Epoxy Hardener Material Safety Data Sheet (MSDS)

AB-312 Epoxy Hardener Material Safety Data Sheet (MSDS)

 

 
rbchallemiteamp
RBC Industries, Inc
80 Cypress Street
Warwick, RI 02888
USA
T:  888-RBC-EPOXY    |    888-(722-3769)    |    401-941-3000
F:  401-941-0150
E:  support@rbcepoxy.com