Decorative Electronics Industrial Hallemite Flooring and Construction

RBC-2510 Technical Data Sheet

Type:  Industrial  
Print this page  |  
 

 

RBC #2510 is a low viscosity, flexible two-part epoxy adhesive that sets within five minutes after mixing.  It is ideal for applications that require a quick bond with superior clarity.  This product exhibits excellent adhesion to metal, glass, crystal, wood, and many plastics.  In addition to traditional packaging, #2510 is available in a pre-measured field kit for quick, on-the-job repairs.

 

HANDLING PROPERTIES:

Mixed Viscosity @ 25oC,cps                                                                              3,000

Shelf Life, (Closed Container @ 25oC)                                                           12 Months

 

PHYSICAL PROPERTIES (CURED):

Color                                                                                                                     Clear

Specific Gravity @ 25oC                                                                                    1.21

Hardness, Shore A                                                                                            85

Linear Shrinkage, in./in.                                                                                    0.007

Moisture Absorption 10 Days @ 25oC, %                                                     0.65

Izod Impact Strength, ft. lbs./in. of notch                                                        0.80

Bond Shear Strength, psi, AI/AI @ 25oC                                                        4,000

Tensile Strength @ 25oC, psi                                                                         3,500

Compressive Strength  @ 25oC, psi                                                            11,000

 

THERMAL PROPERTIES (CURED):

Thermal Conductivity, cal/sec/cm2/oC/cm X 10-4                                         5.1

Thermal Stability, 1000 Hrs. @ 175oC, % Wt. Loss                                    1.30

Coefficient of Thermal Expansion, in./in./oC X 10-6                                        53

Heat Distortion Temperature, oC                                                                       60

Operating Temperature Range, oC                                                              -55 to 120

 

ELECTRICAL PROPERTIES (CURED):

Volume Resistivity  @ 25oC, ohm-cm                                                             5x1014

Dielectric Strength, volts/mil                                                                              380

Dielectric Constant @ 25oC, 100 KC                                                               3.4

Dissipation Factor @ 25oC, 100 KC                                                                0.018

 

 

MIXING INSTRUCTIONS:  Mix one part #2510Resin with one part #2510 Hardener by weight and mix thoroughly by hand for at least two minutes, or machine mix for at least one minute.  Be sure mixture is homogeneous to insure maximum bonding strengths.  Whenever necessary, entrapped air may be removed by vacuum  prior to use.

 

Mix Ratio of Resin to Hardener (by weight)                                 1 to 1  

Pot Life (20 grams @ 25oC)                                                        5 mins.           

Cure Schedule                                                                           5 mins. @ 25oC

 

 

 

 

 
rbchallemiteamp
RBC Industries, Inc
80 Cypress Street
Warwick, RI 02888
USA
T:  888-RBC-EPOXY    |    888-(722-3769)    |    401-941-3000
F:  401-941-0150
E:  support@rbcepoxy.com